PUR
polyurethane coatings
Our polyurethane coatings are high quality bicomponent products, resistant to chemicals and non degradable under influence of UV rays (sun light). The polyurethane paints give an easy-to-clean finish with good gloss and very good colour retention over the years (they do not chalk like epoxies does). Our DTM polyurethane products can be applied as single-coat protection, directly onto properly prepared steel, iron, aluminum and galvanized steel. Polyurethane enamels are used more often as topcoats over epoxy build coats. They are suitable coatings for exposures (C2, C3, C4, C5-I, C5-M): urban, industrial and marine environment.
Due to their ability to provide high quality finish, chemical resistance and mechanical properties, they are commonly applied on structures and metal surfaces exposed on atmospheric conditions (outdoor) e.g. structural steel, external surfaces of tanks and reservoirs, bridges, transport equipment, agricultural and construction machinery and many more.
PUR direct to metal coatings
poluyrethane priming enamels 2 in 1
purmal S-10
bicomponent polyurethane priming enamel 2 in 1
High-build, bicomponent polyurethane coating, UV and chemical resistant, with rust-inhibitive properties, for thick layers application, DTM (direct to metal coating);
available colours: full range of RAL colours / matte;
purmal S-10 struktura
bicomponent polyurethane priming enamel 2 in 1 with rugged finish effect
High-build, bicomponent polyurethane coating, UV and chemical resistant, with rust-inhibitive properties, for industrial use with rugged finish effect, DTM (direct to metal coating);
available colours: full range of RAL colours / matte;
purmal S-40
bicomponent polyurethane priming enamel 2 in 1
High-build, bicomponent polyurethane coating, UV and chemical resistant, with rust-inhibitive properties, for thick layers application, DTM (direct to metal coating);
available colours: full range of RAL colours / semi-matte;
purmal S-70
bicomponent polyurethane priming enamel 2 in 1
High-build, bicomponent polyurethane coating, UV and chemical resistant, with rust-inhibitive properties, for thick layers application, DTM (direct to metal coating);
available colours: full range of RAL colours / semi-gloss;
PUR enamels
polyurethane enamels
purmal S-30
bicomponent polyurethane enamel
bicomponent polyurethane enamel, UV and chemical resistant, for finishing coats;
available colours: full range of RAL colours / semi-matte;
purmal S-30 P
bicomponent polyurethane enamel for indutrial use
bicomponent polyurethane enamel, UV and chemical resistant, for finishing coats, industrial use version;
available colours: full range of RAL colours / semi-matte;
purmal S-30 struktura
bicomponent polyurethane enamel with rugged finish effect
bicomponent polyurethane enamel, UV and chemical resistant, for industrial use with rugged finish effect;
available colours: full range of RAL colours / semi-matte;
purmal S-30 MIO
bicomponent polyurethane enamel with barrier pigments MIO
bicomponent polyurethane enamel, UV and chemical resistant, with barrier pigments MIO micaceous iron oxide, for finishing coats;
available colours: full range of RAL colours / semi-matte;
purmal S-90
bicomponent polyurethane enamel
bicomponent polyurethane enamel, UV and chemical resistant, for finishing coats;
available colours: full range of RAL colours / glossy;
purmal S-90 struktura
bicomponent poliurethane enamel with rugged finish effect
bicomponent polyurethane enamel, UV and chemical resistant, for industrial use with rugged finish effect;
available colours: full range of RAL colours / glossy;
PUR varnish
polyurethane transparent coatings
polyurethane varnish
bicomponent, chemical resistant polyurethane varnish / transparent;
coatings
chosen characteristics
submit your inquiry
already know what products you need?
we’ll come back to you with our best offer
not sure which system will be most suitable?
we’ll prepeare for you our technical and commercial proposal